With 20 years of experience, Compunetics is a pioneer in very high density circuitry. It is one of only a few PCB manufacturers in the world to make these versatile boards for specialized applications and unusual physical constraints. Compunetics has become the vendor of choice when requirements include very high density interconnects.
极速赛车开奖结果网址
One interesting aspect of multilayer flex boards is the ability to have different cross-sections in different areas of the board. Let’s say you need 6 layers in one section but then have to “slim down” […]
极速赛车现场开奖直播
A multitude of things can be added to a “simple” single or double sided flex to enhance form, fit and function. Mechanical stiffeners bonded to one or both sides can be designed to match virtually […]
极速赛车官方网站
Flying leads are one of the unique benefits that can be used on single and double sided flex board designs. The circuit traces become the interconnect to the next board, no connectors required. Just unsupported […]
极速赛车开奖直播视频
One and two layer flex boards are ideally suited for dynamic motion. From a device that requires only a few hundred cycles over its lifetime like a hinged panel that opens only for maintenance or […]
极速赛车玩法
Working with ultra-thin substrates requires tools that are not commonly found in every PCB shop but once you have those tools at your disposal you can achieve results that are hard to match. Think of […]
极速赛车软件
Layers: 4 Material: High Tg FR4 Trace Width: 0.0015 +/-0.0003” Surface Finish: Wirebondable Electrolytic Gold and Nickel Layers: 8 Materials: Thermount/Polyimide (Arlon 85N) Trace Width: 0.002 +/- 0.0003” Stacked Microvias: L1 to L2 to L3; […]
极速赛车官网
High density packaging for the most complex die Specifications Layers: 4 Trace/Space: 3/2 (75/50 µm) Board Features:Electrolytic Ni/Au Bonded Heat Spreader Edge Plating Blind Microvias Material: High Tg FR4
极速赛车结果走势图
Specifications Layers: 12 Trace/Space: 6/6 (150/150 µm) Finish: Immersion Gold Material: Polyimide Rigid DuPont AP Flex
极速赛车冷热号统计
Specifications Layers: 22 ‘Looseleaf’ Design Material: Polyimide Rigid DuPont AP Flex Certifications: IPC-6013 Class III Surface Finish: HAL
极速赛车历史结果
Specifications Layers: 10 with 6 layers flex Finish: 2-Ounce Copper Military Specification Design: Compunetics Drafting Department
极速赛车精准计划网站
Specifications Layers: 8 ‘Looseleaf’ Design Board Features: 3 Double-Sided Flex Cores with Coverlay 2-Ounce Copper on Flex Military Specification
极速赛车怎么玩
Specifications Layers: 14 rigid; 3 flex Material: High Speed FR4 (Isola 408) Dupont AP Flex material Trace Width: 0.002 +/- 0.0003” Controlled Impedance (64 ohms +/- 10%) Buried resistors (400 each of Ohmega Ply 60 […]
极速赛车开奖结果查询
Military Layers: 8 Trace/Space: .0035″ / .0035″ Finish: HASL Differential Controlled Impedance
极速赛车基本走势图
High-Energy Particle Detector Layers: 2 Trace/Space: 2/2 (50/50 µm) Materials: 2 mil thick DuPont AP Flex Finish: Immersion Au over Ni Selective Plating Soldermask: Flexible LPI
极速赛车现场开奖结果
Compunetics is the only manufacturer to make flex with 4 steps of selective plating. This process creates bumplets that enable mechanical connection with an absolute minimum of force. Specifications Layers: 3 Trace/Space: 4 Steps Of […]
极速赛车直播网
3M’s C-Ply material’s high capacitive density enables it to perform the power supply decoupling function and eliminate discrete capacitors. This capability makes it especially beneficial for high-end equipment in the telecommunications, computer, test and measurement, […]
极速赛车人工计划
Ohmega-Ply®, manufactured by Ohmega Technologies, Inc. and TCR®, manufactured by Ticer Technologies, LLC, are thin film resistor-conductor materials. Using standard subtractive printed circuit technology, integral resistors are formed on circuit layers. These resistors can be […]
极速赛车在线走势图
Specifications Layers: 4 Trace/Space: 1.5/1.5 (35/35 µm) Finish: Electrolytic Ni/Au Thickness: 31 ±
极速赛车开奖结果预测
Specifications Layers: 14 Trace/Space: 2/2 (50/50 µm) Finish: Electrolytic Ni/Au Thickness: Electrolytic Gold Blind Vias Cavity Design 2 Buried Resistor Layers
极速赛车历史记录
Designed for high speed networking (10 Gig Ethernet Card) Specifications: IPC-6012 Class III Layers: 8 Trace/Space: Rogers 4003/FR4 Mix Board Features: Blind Vias 1-4 for Stub Length Control Via-In-Pad using Conductive Epoxy 2 Level “Cavity” […]
极速赛车人工计划软件
Designed for high speed military radar Specifications Layers: 4 Material: Rogers 6002, 4350, 4403 Drilling: Blind 1-to-2; 4-to-3; 1-to-3; Buried 2-to-3 Cavity: 4-to-3 Trace Width: 10 mils Tolerance: +/- 0.0003” Surface Finish: Electrolytic Nickel and […]
极速赛车最新开奖号码
Designed for wireless communications Specifications Layers: 2 Material: Rogers 3003 Trace Width: 10 Tolerance: +/- 0.0003” Precision laser routed slots Finish: Electrolytic Nickel and Gold